新手上路
二星級會員
- 註冊時間
- 2013-2-18
- 積分
- 153
- 保證金
- 0 元
- 主題
- 0
- 精華
- 0
|
樓主 |
發表於 2017-10-31 18:00:27
|
顯示全部樓層
2017/10 月 ARC M2重大更新
繼機器韌體更新DOLBY VISION/ HDR/ HLG ，ARC M2調整軟體更新可BYPASS EQ各聲道後， 事隔不到兩個月，ARC M2 調整軟體再度重大更新。
v1.8.6502:
1. Changed the appearance of the color legend below graphs, especially when viewing curves for all mic positions at once.
修正檢視圖面各聲道自設顏色。
2. Added option to correct up to 20 kHz for most remaining models: MRX x10, MRX x20, PW Soundbar, PW/MLW Series.
目標手動設置內增加中高頻調整範圍由5000HZ修正至20000HZ[/COLOR]
3. Quick Measure additions 快速測量:
- sensitivity calculation display
新增即時測量靈敏度資訊
- click Save to keep the most recent curve on the display. This can be done with multiple curves. They will remain on display until the Quick Measure window is closed.
保留儲存最新測量資訊，便於交互檢視，觀察頻譜間變化。
- (STR only, v1.4.6538 or later) sub or subs can be swept at the same time as a front speaker
- (STR only, v1.4.6538 or later) processing can be applied during sweeps - for details hover on the "Apply Processing" checkbox
4. Default profile name is " rofileX". To apply the new default to an existing measurement, click Auto Detect, OK, Calculate, Upload.
預設組名" ProfileX"，可自訂既有測量組為預設組，僅需按自動偵測，演算，上傳即可。
5. Increased support for devices with low sample rate, for example 32k.
新增支援低取樣率音訊裝置，如32K
6. (AVM/MRX) Deleted Middle On-Wall option for Height1 and Height2.
四個上方聲道設置取消"中置掛牆"選項
7. Invalid characters in file name which were preventing upload get replaced with "?".
修正存檔檔名不能存檔的字詞，避免上傳時出現錯誤訊息。我在測試使用中文存檔時，上傳到最後也無法完成，因此建議使用英文或是數字存檔以避免此問題。[/COLOR]
8. Various additional improvements and minor fixes.
其餘小修正
此次重大更新最重要的是中高頻修正可由原本僅可修正到5000HZ，更新為可修正到20000HZ，此處要特別提醒各位玩家們，先利用QUICK MEASURE查看自己高頻的衰減程度，再選定應該修正到哪個頻段，不然硬拉恐怕您的高音會燒燬，請特別注意![/COLOR]
只能說Anthem 不僅在聲音音質水準表現優異外，這個價位帶自動調整的軟體能持續更新更是令人佩服讚賞。 |
|
]
發表於 2017-9-6 11:51:15
